RK Products Closing Wheel Frame Repair Kit

Copperhead Ag RK Products Closing Wheel Frame Repair Kit

RK Products Closing Wheel Frame Repair Kit, provided by Copperhead Ag Products, replaces the bushing on a closing wheel arm with a bearing. It can be used on brand-new planters and on planters that already have some wear to the closing wheel arm. Having the closing wheel arms tight is critical to keeping closing wheels centered on the seed trench and ensuring that your closing wheel can operate at peak performance.

If your arm is worn, you will need to weld a bearing housing onto the outside of the tailpiece to hold a ball bearing. If the closing wheel arm is new, this is not necessary and saves a lot of cost and work.

Please contact PASI to specify the model of the planter so that the correct kit is ordered for either WORN tailpieces or BRAND NEW tailpieces.

Testimonials

What People Are Saying

Support has never been an issue. I was able to increase efficiency on the farm without adding more operators.

Anthony Schroeder

Ohio

Evan (with Precision Agri Services, Inc.) has been great to work with. Everything he told me he followed through on in a very timely response. Their product knowledge and support have been great.

Chad Tryon

Ohio

Slight hills were drawing it down at C3 at around 10.0 mph going down to as low as 9.0. After the tune with AgroEcoPower we were in D1 at 12.2 mph and no draw down whatsoever.

Scott Gaier

Within thirty seconds I knew you knew what you were doing. I have no patience and I know if I call, I will get an answer. Product knowledge and service is everything.

Steve Hines

Ashville, Ohio

Evan (with Precision Agri Services, Inc.) did a great job presenting me with options on a steering system I was not satisfied with. He helped me use Ag Leader technology I Already had to Convert it to steer my 8520 John Deere. Tech support is top-notch with him.

Jake Henry

Ohio

We had our 8320 ECU rewritten and are so happy we did! Tanner took the tractor from 260hp up to 305hp and it is a world of difference. We are pulling our digger faster at less rpm and can't wait to see what it will do on our vertical till!

Jeff Adams

Scott, Ohio

Just put it (Ag Leader InCommand 1200 with ISO serial bridge) to the test. Everything works really well. Each boom sections on and off, in and out of multiple different paint zones. Pretty sweet deal!

Jim Patton

Hillsboro, Ohio

Tuned John Deere 8310R with Stock HP: 311hp Tuned: 360hp and Stock Torque: 1071lb/ft. Tuned: 1244lb/ft with AgroEcoPower.

John Deere 8310R

This little workhorse just gained a few more horses [with AgroEcoPower]. I use this utility tractor for just about everything now the tractor has some more added power to complete my tasks. Stock HP: 36hpTuned 48hp with AgroEcoPower.

Massey Ferguson 1736

Belpre, Ohio

Copperhead Ag RK Products Closing Wheel Frame Repair Kit

Related Products

What People Are Saying

We are farmers, too.